Non Asbestos Heat Shield / Filler Material
Types Available
Non Asbestos Heat Shield / Filler Material
HT-50
HT-50 is a medium density material with good heat and flame resistance. It is intended for use as a general purpose insulating filler material in exhaust manifold and heat shield applications and can withstand a maximum temperature of 400°C.
Technical Specification
| S. NO. | PROPERTY | SPECIFICATIONS | TEST METHOD |
|---|---|---|---|
| 1. | DENSITY gm/cc | 1.05-1.15 | ASTM F-1315 |
| 2. | COMPRESSIBILITY % AT 70 kg/cm² (1000 psi) |
15 (max) | ASTM F-36 |
| 3. | RECOVERY % | 20 (min) | ASTM F-36 |
| 4. | TENSILE STRENGTH kg/cm² | 20 (min) | ASTM F-152 |
| 5. | LOSS ON IGNITION % AT 600°C |
18 | ASTM F-433 |
| 6. | MOISTURE CONTENT % | 2 (max) |
Remarks & Related Data
Specification values determined by test methods required for ASTM F-104, TYPE 3 MATERIALS
Availability
Other special sizes available on request.
